The INVTABLE file replaces the SIPOLS and ACTVNAMS files previously used by SMOKE. Smkinven uses the inventory table to select the inventory pollutants that will be output by Smkinven. The valid pollutants are again checked at the end of SMOKE processing by Smkmerge, to ensure that the program knows about all of the pollutants and also to set the order of the output variables (output species
are sorted by the order of the pollutants in the inventory table and for multiple species per pollutant, by alphabetical order).
You can use the INVTABLE to drop inventory pollutants in Smkinven without having to modify the inventory files, simply by modifying INVTABLE. The units used in the SMOKE intermediate files are listed in this file. The SMOKE programs Spcmat, and Movesmrg use this file to determine which pollutants should be included in the NONHAPVOC or NONHAPTOG calculation.
The inventory table also provides a way to assign the SPECIATE4 species ID to any pollutant that is a Hazardous Air Pollutant
(HAP) VOC. This assignment is not used directly by SMOKE, but rather is used by the Speciation Tool when creating VOC speciation
profiles. This is used only when creating speciation profiles to support SMOKE runs that will combine criteria VOC and HAP
VOC emissions, using the NHAPEXCLUDE file in the Smkinven program. More specifically, this can be done for the purpose of using VOC HAP emissions to augment VOC speciation profiles.
Since the Inventory Table provides information to the Speciation Tool, this field is not used by SMOKE, but is included for
continued integration of SMOKE inputs with the Speciation Tool.
As described in the Smkinven documentation in Chapter 6, Smkinven in some cases will create "no-integrate" (NOI) HAP pollutant emissions from the inventory data by renaming the pollutant
with a "_NOI" suffix applied to the end of the Inventory Data Name from the Inventory Table for such pollutants. Similarly,
Smkinven will automatically add all possibly needed "_NOI" pollutant names to the internal master list of valid pollutant names. This
list would otherwise be limited to the contents of the INVTABLE file entries where the Keep column contains an "Y". Smkinven inserts these names in the master list such that the "_NOI" version of the pollutant name appears in the list just after
the polutant on which the name is based. The inserted entries that include "_NOI" are made when the following values are
included for the pollutant in the INVTABLE file.
A "Y" appears in the "Keep" field
A "V" or "T" appears in the "VOC or TOG component" field
A "Y" appears in the "Model species" field
Something other than "Y" appears in the "Explicit in mechanism" field (e.g., "N" or blank)
It is possible for a user to choose two pollutants that result in double counting the emissions from the inventory. For example, you may want to model both benzo(a)pyrene and 7-PAH which, would result in the emissions associated with CAS number 205992 (for benzo(a)pyrene) to be duplicated. The user is responsible for the choices made and the resulting changes in inventory mass.
The format of the INVTABLE is shown in Table 6.91, “Format for INVTABLE”.
Table 6.91. Format for INVTABLE
| Position | Description | Type |
|---|---|---|
| 1-11 | Inventory data name | 11-character string |
| 13-15 | Mode (optional) e.g., EXR, EXS, EXH, EVP, BIO | 3-character string |
| 17-32 | Inventory Pollutant Code | 16-character string |
| 34-38 | SPECIATE4 ID(optional) | Integer |
| 40 | Reactivity group (not used by SMOKE) | Integer |
| 42 | Keep (Y or N) | 1-character string |
| 44-49 | Factor | Float |
| 50 | VOC or TOG component (V/T/N) | 1-character string |
| 52 | Model species (Y/N) | 1-character string |
| 54 | Explicit in mechanism (Y/N) | 1-character string |
| 56 | Activity | 1-character string |
| 58-60 | NTI | Integer |
| 62-77 | Units to be used in SMOKE intermediate files (changing not recommended) | 16-character string |
| 79-118 | Inventory data description - a description of the name provided in columns 1-11. | 40-character string |
| 119-158 | CAS pollutant description - a description of the CAS or pollutant code contained in the inventory | 40-character string |
The columns in the INVTABLE are used as follows:
Inventory data name: Unique name for pollutant or activity that will be stored and processed by SMOKE. Because of I/O API restrictions, these names can only include alphanumeric characters and underscores, and the first character must be a letter. In addition, because SMOKE uses double-underscore as a separator when appending to variable names, no double-underscores are permitted in these names.
Mode: This three-letter code represents the emissions mode that SMOKE uses to augment the pollutant names. Emissions mode usually refers to the on-road or nonroad mobile exhaust or evaporative emissions. If present in a record of the Inventory Table, SMOKE will combine the Mode field with the Inventory Data Name field using a double underscore. So, if the Inventory Data Name is "VOC" and the Mode is "EXH", then the pollutant name in SMOKE intermediate files will be stored as "EXH__VOC".
Inventory Pollutant Code: This code represents the pollutant that is provided in the inventory file input into SMOKE, and is sometimes the Chemical Abstracts Service (CAS) number when the inventory uses CAS numbers to identify pollutants. Smkinven matches this code to a ORL-formatted inventory file to assign the combination of Mode and Inventory Data Name (columns 2 and 1 as described in the previous bullet), which is used in all subsequent SMOKE intermediate files and reports. This code is not used by SMOKE in any other way.
SPECIATE4 ID: The SPECIATE4 ID is the unique species identifier in SPECIATE4 (the "ID" field in the SPECIES_PROPERTIES table). This code is not used by SMOKE, but rather is used during import of the Inventory Table to the Speciation Tool.
Reactivity group: The reactivity group for the ASPEN model. It is not used in SMOKE.
Keep: Indicates whether SMOKE should keep the CAS number associated with this inventory data name. SMOKE will keep any inventory data with at least one CAS number with a Y.
Factor: The adjustment factor to use in splitting the emissions associated with a CAS number into different inventory data names, or reducing the mass of a metal compound associated with a CAS number to account for the metal mass only.
VOC or TOG component: A “V” should be entered if the CAS number is part of VOC emissions or TOG emissions. A “T” should be entered if the CAS number is part of TOG emissions only. An “N” should be entered if the CAS number is part of neither VOC or TOG. Any other value other than “V” or “T” will be treated as an “N”.
Model species: A “Y” should be entered if the pollutant is also a VOC model species for the AQM being targeted for the run. Any other values will be treated as an “N”.
Explicit in mechanism: A “Y” should be entered if (1) the pollutant is a VOC species (the model-species column must be “Y” as well), and (2) that model-species is explicitly treated in the AQM’s chemical mechanism. The pollutant can be an explicit
species in the chemical mechanism only when the GSPRO file definitions of the lumped VOC species have been adjusted to account for the pollutants/species that are explicit in
the mechanism. The current explicit-in-mechanism species being used in the toxics CB6 mechanism for CMAQ are formaldehyde,
acetaldheyde, acrolein and 1,3 butadiene.
Activity: A “Y” should be entered if the inventory data name is a type of activity instead of emissions. Any other values will be treated as an “N”.
NTI: Code identifying a HAP on the Clean Air Act HAP list (list of 188 HAPs). Not currently used by SMOKE; will be used in the future for growing HAP emissions to future years.
Units: The units to store the data in the SMOKE intermediate files. This should be “short tons/year” for emissions values, “miles/year” for VMT, and “miles/hr” for speed. Although this is provided as an input field to allow possible future changes, these values should not be changed by the user and are unrelated to the units of the emissions in the input files.
Inventory data descriptions: This is the description of the inventory data name listed in columns 1-11.
CAS pollutant description: Describes the pollutant that is coming from the inventory that is being input into SMOKE.